Garage doors rarely fail at a convenient time. If you need commercial garage door repair in Texas, we can often come out the same day when a technician is available. Repairs for commercial sectional, overhead and service doors.
Safety first: springs and cables hold hundreds of pounds of tension. Don't try to adjust or remove them yourself, and don't run the opener on a door that's crooked or has a broken spring.
Is it time for commercial garage door repair?
- The door won't open or close, holding up deliveries
- Damage from forklifts or trucks
- Broken springs or cables on a heavy commercial door
- The operator faults or stops
Why this happens
- High cycle counts
- Vehicle impact
- Worn springs, cables and rollers
What you can check yourself
- Put the door out of service and keep staff clear.
- Note any fault codes on the operator.
Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.
What happens during the visit
- Secure the door and assess the damage
- Quote parts and labor
- Repair springs, cables, sections or track
- Adjust or repair the operator
- Test safety devices
Typical commercial garage door repair prices
What moves the price:
- Door size, gauge and cycle rating
- Operator type and controls
- Parts availability for your model
- Lift equipment and after-hours access
These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.
Commercial Garage Door Repair in Texas
Humid air in Texas rusts cables, roller bearings and hinges, which makes the door noisy and heavy and eventually makes the opener strain.
Close to the coast, salt air speeds up corrosion. Galvanized or coated springs, nylon rollers and stainless hardware hold up better than bare steel.
We cover 685 cities and towns across Texas. Find commercial garage door repair in your city:
Commercial Garage Door Repair: frequently asked questions
How much does commercial garage door repair cost in Texas?
Commercial Garage Door Repair typically costs $250-$1,000 including parts and labor, and usually takes 1-4 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.
Can you do commercial garage door repair the same day?
Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.
Is commercial garage door repair covered by a warranty?
Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.
Are your technicians licensed and insured?
Our technicians are insured, and where Texas or your city requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.
Should I repair or replace my commercial door?
A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.