Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving all of Texas

Commercial Overhead Door Installation in Texas

Commercial sectional, insulated and high-cycle doors and operators installed. Typical cost $2,500-$12,000.

Our commercial overhead door installation service in Texas comes down to three things: a clear diagnosis, the right parts on the truck, and a door that is balanced and safety-tested when we finish. Commercial sectional, insulated and high-cycle doors and operators installed.

When to call for commercial overhead door installation

  • New construction or a tenant fit-out
  • Damaged or worn-out doors
  • Upgrading to insulated or high-cycle doors

What usually causes it

  • Business growth and building updates

Before the technician arrives

  • Count daily cycles so springs and operators are rated correctly.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Survey the opening and how the door will be used
  2. Specify the door, springs and operator
  3. Install the door and operator
  4. Install safety devices
  5. Train staff and test

Commercial Overhead Door Installation cost in Texas

$2,500-$12,000Typical range, parts & labor
1-2 daysTypical time on site

What moves the price:

  • Door size, gauge and cycle rating
  • Operator type and controls
  • Parts availability for your model
  • Lift equipment and after-hours access

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Commercial Overhead Door Installation in Texas

For Texas homes, look at insulated steel or composite doors that resist moisture, and ask whether wind-load requirements apply to your area before you choose a model.

Parts of Texas are exposed to hurricanes and tropical storms. A garage door is often the largest opening in a home, so wind-rated doors and reinforcement kits matter here, and building codes in coastal areas may require them when a door is replaced.

Hailstorms are common in parts of Texas. Hail can dent steel panels and crack windows, and thicker-gauge or insulated doors resist dents better than thin single-layer steel.

We cover 685 cities and towns across Texas. Find commercial overhead door installation in your city:

Commercial Overhead Door Installation: frequently asked questions

How much does commercial overhead door installation cost in Texas?

Commercial Overhead Door Installation typically costs $2,500-$12,000 including parts and labor, and usually takes 1-2 days. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do commercial overhead door installation the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is commercial overhead door installation covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Texas or your city requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my commercial door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Texas

Rolling Fire Door Inspection & Drop Testing

Annual drop testing and inspection of rolling fire doors.

Typical $150-$500

Hörmann Garage Door Opener Installation

New chain, belt, screw-drive and wall-mount openers installed and programmed.

Typical $350-$800

Midland Garage Door Off-Track Garage Door Repair

Doors that have come off their tracks secured, re-hung and realigned.

Typical $175-$450

Amarr Extension Spring Replacement

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $150-$350

Martin Door Off-Track Garage Door Repair

Doors that have come off their tracks secured, re-hung and realigned.

Typical $175-$450

Cornell Cookson Commercial Garage Door Repair

Cornell Cookson makes rolling steel service doors, security grilles and rolling fire doors.

Typical $250-$1,000

Belt Drive Opener Installation & Repair

Quiet belt-drive openers, ideal for garages under bedrooms.

Typical $400-$900

Ryobi Remote & Keypad Programming

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $50-$150

Stanley Remote & Keypad Programming

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $50-$150

Garaga Garage Door Installation

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $1,200-$4,500

Ideal Door Garage Door Track Repair

Bent, loose or misaligned tracks straightened, realigned or replaced.

Typical $150-$400

Cornell Cookson Rolling Steel Door Repair

Cornell Cookson makes rolling steel service doors, security grilles and rolling fire doors.

Typical $300-$1,500

Garage door stuck, noisy or broken?

Talk to a garage door technician in Texas now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote